联系信息

Chart / Happy / Esex / Tri-Thermal

俄克拉何马州塔尔萨

+1 918 834 3600

+1 918 834 3600

Hudson Service / Smithco

Beasley, TX

+1 281 396 8100

+1 281 396 8100

联系我们表单

Service Center & Aftermarket

Incorporating Chart Lifecycle and Hudson Service, our full service and aftermarket capability dedicated to keeping you online and productive. We respond to your needs promptly and efficiently.

Site Service Team

You’ll always speak directly with an experienced member of our team so you can be certain that your enquiry is being dealt with by someone who understands the products and your needs. Not only do we service our own brands, we service those of our competitors, both in the field and at our plants. From keeping your coolers in perfect working order, tailored solutions for upgraded performance and a huge parts inventory, Chart is the one-stop shop for all servicing, retrofits, replacement units and parts. We make the improvements that drive your productivity and improve your profitability.

Chart Lifecycle and Hudson Service Provide Parts and repair services

Chart, Hudson, Smithco, Tuf-Lite®, Fin-Fan® 5 leading names, 1 first class company. Trust the commissioning and start-up of your air cooled heat exchangers to the people behind the leading brands and rest assured that the job will be done safely, efficiently and right the first time. Let the most experienced team in the industry verify, validate and certify your assets.

Aftermarket Service on an ACHX
Retro-fit with Tuf-Lite®

When the going gets tough, the tough go with Tuf-Lite quality. In fact, when it’s time for a replacement fan, 85% specify Tuf-Lite. Ask about our “Trial Fan Offer”. Install a Tuf-Lite high performance fan next to a competitor brand, test it, and if not fully satisfied, return it free of charge.

 
 
We service and repair competitor products

Not only that either, we also supply replacement parts and complete replacement bundles for any air-cooled heat exchanger.

Fin Tubes From an ACHX
 
 
Fin Cleaning Services
Let our cleaning services make a difference to your bottom line

Our environmentally-safe air-cooled heat exchanger cleaning services are done on-site with no need for plant shutdown or motor isolation in some cases. The results: increased air flow, decreased static pressure, power usage, and improved heat transfer.

 
 
备件部

The industry’s most extensive inventory of spare parts and direct factory warehouse access for anything we don’t stock. Total supply for all Hudson, Smithco and Chart legacy brands including Happy Division, Tri-Thermal and Esex. We also carry an extended inventory for Conrad, Goodfellow and Western heat exchangers.

Logos
 
 

Services Available

   

Certified Fan, Mechanical Equipment, and Part Installation

It is critical that your fan is properly installed to ensure that you have the proper pitch, tracking, tip clearance, and alignment in order to maximize the performance and reliability of your fans. Also, when Chart installs your fans, we extend the length of our warranty at no additional cost.

   

Fan and Mechanical Performance Analysis

Chart can assist you with analyzing your current mechanical performance by providing Air Side Performance Testing in accordance with ASME PTC-30 standards, Equipment Vibration Analysis, and noise testing all utilizing our custom designed analytics and equipment.

   

Fan and Mechanical Performance Upgrades and Re-rates

If you need better performance from your air-cooled heat exchanger, air cooled steam condensers (ACCs), and compression coolers, Chart can design a new fan and mechanical system to improve performance, energy efficiency, and reliability. Chart can also show you how the improvement will affect your unit by conducting an HTRI performance re-rate. Also, our Fin-Fan bearings, branded drive belt systems, parabolic inlet bells, tip seals, louvers, anti-rotation devices are all performance accessories to improve the maintenance life-cycle of the equipment and dramatically increase unit air flow performance.

   

Energy Savings Study

We’ll tell you how to improve the energy efficiency of your air-cooled heat exchanger and axial flow fans.

   

Installation and Start-Up

From supervision through to complete installation and start-up, our experienced team is with you during installation, commissioning and start-up.

   

Bundle Cleaning

One of the most common performance problems with air-cooled heat exchangers is underperformance due to airborne contaminants fouling the air side of the finned tubes. Our proprietary dry cleaning system does not use harsh foams, chemicals, water, or detergents that can damage your fins and mechanicals. The cleaning system allows the ability to clean induced draft air-cooled heat exchanger online while the fans will need to be shutdown in a forced draft unit. Also, tube fouling occurs from the bottom side of the tubes and unlike foams and detergents, the Chart system cleans from the bottom (air-side) and not from the top down. Therefore, it is more effective in cleaning where the actual fouling is located. Also, it is safe, environmentally friendly, non-destructive to the equipment, and proven to be the most effective in the industry at restoring unit performance. Cleaning services can be offered on a routine maintenance schedule to ensure continuous performance.e finned tube degradation. Upgrade to Hudson Hy-Fin® Extruded Fin Tubes to increase heat transfer efficiency and unit performance. Hudson can also provide Hudson’s unique Hy-Fin® Extruded Serrated Design to provide additional performance over the original design.

Chart does not recommend using foams, chemicals, detergents, or water as these methods may damage mechanicals or the tubes, and may cause scaling that could affect thermal performance of the equipment.

   

Finned Tube Bundle Upgrades

We’ll assess the performance of existing tube bundles with proprietary single tube testing analyses, to calculate finned tube degradation. Upgrade to Hudson Hy-Fin® Extruded Fin Tubes to increase heat transfer efficiency and unit performance. Hudson can also provide Hudson’s unique Hy-Fin® Extruded Serrated Design to provide additional performance over the original design.

   

Replacement Bundles and Shop Re-Tubes

Our expedient response to clients with scheduled or unscheduled plant shutdowns or urgent bundle repairs is well known. We can provide full replacement bundles or re-tubing for any brand of air cooled exchanger in short notice with accelerated completion schedules.

   

Field Re-Tubes

When shop repairs are not an option, Chart will send an experienced team to site and repair the unit in situ

   

Hot Air Recirculation

A common problem in plant air cooler equipment when the hot exhaust air recirculates into the inlet and reduces performance. Solutions are often simple but difficult to predict, but through smoke testing and/or proprietary Computational Fluid Dynamics software, we’ll analyze various solutions and offer you the optimum fix.

   

Pre-Turn Around Inspections

We’ll help you expedite your turn around by conducting a full air-cooled heat exchanger and axial fan inspection beforehand.

   

Turn Around Support

We can participate in your turn around by installing and upgrading your fans, conducting maintenance on your air-cooled heat exchangers, cleaning the fins of your air-cooled heat exchangers, work in an advisory role, or commissioning your air-cooled heat exchangers.

   

备件部

Huge parts inventory and direct factory warehouse access for anything we don’t stock. Total supply for all Hudson, Smithco and Chart brands including extended inventory for legacy brands Happy Division, Tri-Thermal, Esex, Conrad, Goodfellow and Western.

联系信息

Chart / Happy / Esex / Tri-Thermal

俄克拉何马州塔尔萨

+1 918 834 3600

+1 918 834 3600

Hudson Service / Smithco

Beasley, TX

+1 281 396 8100

+1 281 396 8100

联系我们表单